Characterization and Control of Interfaces for High Quality Advanced Materials II (Hardback)
  • Characterization and Control of Interfaces for High Quality Advanced Materials II (Hardback)
zoom

Characterization and Control of Interfaces for High Quality Advanced Materials II (Hardback)

(editor), (editor)
£52.95
Hardback 360 Pages / Published: 23/03/2007
  • Out of stock

This product is currently unavailable.

  • This item has been added to your basket
Table of Contents JOINING TECHNOLOGY FOR NEW METALLIC GLASSES AND INORGANIC MATERIALS The Structure of the Welded Zone and Phase Transformation Behavior of Ni-Based Bulk-Glass Forming Alloy (D.V. Louzguine-Luzgin, G. Xie, T. Tsumura, K. Nakata, Y. Murakami, H.M. Kimura, and A. Inoue) Brazing of Advanced Ceramic Composites: Issues and Challenges (Mrityunjay Singh and Rajiv Asthana) Development of a Variable Temperature UHV-Laser Microscope Combined With a Pulsed Laser Deposition for In Situ Studies of Ceramics/Metallic Glass Interfaces (Yuji Matsumoto, Takuma Obata, Miki Hiraoka, and Masao Katayama) Stress Analysis of Geometrically Complex and Ultra Large Scale Model by Fractal Multi-Grid Method (H. Murakawa, H. Serizawa, M. Tejima, K. Taguchi, and S. Itoh) Influence of Grain-Grain Interfaces on Heat Transfer in Dense and Porous Oxide Ceramics (D.S. Smith, C. Poulier, B. Nai t-Ali, A. Michot, and J. Absi) Fabrication of Colloidal Photonic Crystals from Submicron-Sized Spheres (Daisuke Nagao, Mitsuaki Hirose, Ryoji Kameyama, Hideki Matsumoto, Yoshio Kobayashi, and Mikio Konno) Spark Plasma Sintering of Al2O3 Particulate Dispersed Zr55Cu30Al10Ni5 Metallic Glassy Matrix Composite (Guoqiang Xie, Dmitri V. Louzguine-Luzgin, Akira Okubo, Hisamichi Kimura, and Akihisa Inoue) Porous Bulk Metallic Glass Produced by Spark Plasma Sintering of Gas Atomized Zr55Cu30Al10Ni5 Glassy Powders (Guoqiang Xie, Wei Zhang, Qingsheng Zhang, Dmitri V. Louzguine-Luzgin, Akira Okubo, Hisamichi Kimura, and Akihisa Inoue) Mechanical Properties of Friction-Stir Welded Titanium Joint (Hidetoshi Fujii, Hideaki Kato, Kazuhiro Nakata, and Kiyoshi Nogi) Silica-Coating of Barium Titanate Particles (Hideki Matsumoto, Daisuke Nagao, Yoshio Kobayashi, and Mikio Konno) Dissolution of Hydrogen into Tungsten Phosphate Glasses through Palladium Coating (Hiromasa Tawarayama, Hiroshi Kawazoe, Shouichi Sugata, Futoshi Utsuno, Hiroyuki Inoue, and Hideo Hosono) Properties of Metallic Glass Coatings on an Aluminum Alloy Substrate Produced Using a HVOF Spraying Process (Hyun-Guen Kim, Kazuhiro Nakata, Takuya Tsumura, Masaharu Sugiyama, Takanori Igarashi, Masahiro Fukumoto, Hisamichi Kimura, and Akihisa Inoue) Photoelectron Spectroscopic Study of Energy Level Alignment at C12A7: e- / Alq3 Interfaces (Ki-Beom Kim, Maiko Kikuchi, Masashi Miyakawa, Hiroshi Yanagi, Toshio Kamiya, Masahiro Hirano, and Hideo Hosono) Development of Nanoceramics: Application to Diffusion Bonding (Michiyuki Yoshida, Yutaka Shinoda, Takashi Akatsu, and Fumihiro Wakai) Influence of Friction Stir Welding Parameters on Microstructure and Mechanical Properties of AA2024-T3 Aluminum Alloy (Saad Ahmed Khodir, Toshiya Shibayanagi, and Masaaki Naka) Effects of Processing Temperature on Bonding Behavior of Hydroxyapatite Ceramics and Titanium by Hydrothermal Hot-Pressing Method (Takamasa Onoki, Tomoaki Watanabe, Eiichi Yasuda, Masahiro Yoshimura, Toshiyuki Hashida, and Yasuhiro Tanabe) Weldability and Mechanical Property of Ni53Nb20Ti10Zr8Co6Cu3 Metallic Glass Foil by Laser Welding (Takuya Tsumura, Katsunori Kobayashi, Kazuhiro Nakata, Natsuki Yoneyama, Taichi Murakami, Hisamichi Kimura, and Akihisa Inoue) Glass Transition Phenomena and Heat Capacity of Zr0.55Al0.10Ni0.05Cu0.30 (Yosuke Moriya, Takahiro Yoshida, Hitoshi Kawaji, Tooru Atake, MikioFukuhara, Hisamichi Kimura, and Akihisa Inoue) Development of Fiber Laser Aided Spot Heating System and its Application to Control of Microstructure in Pure Aluminum (Toshiya Shibayanagi, Masahiro Tsukamoto, Nobuyuki Abe, Nobuyuki Matsuda, Yukihiro Soga, and Takamasa Matsumoto) Preparation of an MTES Hybrid Bioactive Coating on Metal Surfaces Using the Sol-Gel Method (Yasuto Hoshikawa, Eiichi Yasuda, Takamasa Onoki, Masaru Akao, and Yasuhiro Tanabe) Synthesis of SiO2-Coated Magnetite Nanoparticles and Immobilization of Proteins on Them (Yoshio Kobayashi, Mayumi Yoshida, Daisuke Nagao, Yasuo Ando, Terunobu Miyazaki, and Mikio Konno) NANO-PARTICLES AND POWDERS Fabrication of Textured Alumina-Mullite-Silicon Carbide Nano-Composites (Yoshio Sakka, Sho Saito, Atsushi Honda, and Tohru S. Suzuki) Colloidal Consolidation of Mixed Powders of the Alumina/Indium Tin Oxide System (Naoki Matsunaga, Shinji Ueno, Yosuke Tanaka, and Yoshihiro Hirata) Improvement of Silica Particle Dispersability in Xylene Using Surface Modification (Chika Takai, Masayoshi Fuji, and Minoru Takahashi) Self-Dispersible Silica Nanoparticles Modified with Aminoalkylsilane (Toshio Kakui, Mitsuru Ishii, Sayaka Sato, Masao Ishiguro, and Koji Hisanaga) Low Temperature Co-Fired Ceramics (LTCC) - Design and Characterization of Interfaces (Torsten Rabe, Markus Eberstein, and Wolfgang A. Schiller) Controlling Interfacial Chemistry During the Processing of Micron Scale Surgical Instruments (Nicholas Antolino, Gregory Hayes, James H. Adair, Christopher Muhlstein, Mary Frecker, and Eric Mockensturm) Development of Nanoencapsulated Curcumin in Chitosan for Cosmetic Use via Evaporation ofO/W/O Emulsion (W. Tanthapanichakoon, N. Sowasod, and T. Charinpanitkul) Structural and Morphological Study of Nanoceramics Prepared by Spray Pyrolysis (L.S. Gomez, M.E. Rabanal, J.M. Torralba, L. Mancic, and O. Milosevic) Influence of Water Content of Starting Powder Mixture on the Mechanochemical Synthesis of Strontium Doped Lanthanum Manganite (Jintawat Chaichanawong, Kazuyoshi Sato, Hiroya Abe, Makio Naito, Tawatchai Charinpanitkul, and Wiwut Tanthapanichakoon) Carbon Nanotubes as Photocatalytic Carriers (Georgios Pyrgiotakis and Wolfgang Sigmund) Anisotropic Sintering Shrinkage and Grain Growth for Spherical Alumina Powder Compacts Aligned in High Magnetic Field (Anze Shui, Lingke Zeng, Yanchun Liu, Atsushi Makiya, and Keizo Uematsu) Effect of Mo Powder Surface Condition on Fabrication of Mo-SiO2 Functionally Graded Materials with Slipcasting Method (Ayumu

Publisher: John Wiley and Sons Ltd
ISBN: 9780470097366
Number of pages: 360

You may also be interested in...

Mechanics of Materials For Dummies
Added to basket
The New Science of Strong Materials
Added to basket
The Oxford Solid State Basics
Added to basket
The Simple Science of Flight
Added to basket
Model Aircraft Aerodynamics
Added to basket
Engineering Materials: v. 1
Added to basket
Reinforced Concrete Design
Added to basket
Hydraulics and Pneumatics
Added to basket
Materials
Added to basket
£42.99
Hardback
Mechanics
Added to basket
£49.99
Paperback
Thermodynamics for Dummies
Added to basket
Materials Science and Engineering
Added to basket
A Dictionary of Chemical Engineering
Added to basket

Reviews

Please sign in to write a review

Your review has been submitted successfully.